Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

I can't change this grid distance

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
Anonymous
1346 Aufrufe, 3 Antworten

I can't change this grid distance

I following this tutorial (Here)

 

Here my result: (I can't change the distance from A to B like in video tutorial. He is using array and me too, but he can change the distance from A to B but I can't.

and Why my (A) (B) or (1) (2) (3) title in my gridline located at the end of line not I starting line? in video (a) (b) located at left side, but mine at right side

Capture.PNG

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: Anonymous

Hello you can click the grid and ungroup and if you want you grid into the other side just click the grid and you will see the box come out just untick and go to the other side and tick the box you have to this to the individual grid. Thanks




Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
Anonymous
als Antwort auf: ennujozlagam

Thank you, its works Lachender Smiley

 

And I think the problem is this , lol

Capture.PNG

Nachricht 4 von 4
ennujozlagam
als Antwort auf: Anonymous

Yes that is correct once you array it becomes group so you need to untick that before you array. Thanks




Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report