Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

How to draw circumscribe polygon?

7 ANTWORTEN 7
GELÖST
Antworten
Nachricht 1 von 8
LanggamanXavierMassed
628 Aufrufe, 7 Antworten

How to draw circumscribe polygon?

hello! I tried to create a polygon and I had to make it based on a radius that is not towards the corners but the midpoints of the sides, circumscribed in other terms. how can I draw such shape via circumscribed radius because I cannot see a setting in the option bar. thank you in advance

7 ANTWORTEN 7
Nachricht 2 von 8

are you referring to this? please see screenshot, you need pick maybe draw lines and choose polygons. thanks

draw.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 8

not the number of sides but on how the radius could possible be referred to polygon center to one of the line's midpoint(internal tangent) and not corner

Nachricht 4 von 8
RobDraw
als Antwort auf: LanggamanXavierMassed

Ummm...

 

Circumscribed.jpg


Rob

Drafting is a breeze and Revit doesn't always work the way you think it should.
Nachricht 5 von 8

you can preset Radius:

Image 2.png

 

Constantin Stroescu

EESignature

Nachricht 6 von 8

oh my god I didn't see that! hahaha thank you, that was silly jeez

Nachricht 7 von 8

you wrote

not the number of sides but on how the radius could possible be referred to polygon center to one of the line's midpoint(internal tangent) and not corner

 

it was in my screenshot post. thanks

rad.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 8 von 8
RobDraw
als Antwort auf: ennujozlagam

All of us gave the same solution, thanks.


Rob

Drafting is a breeze and Revit doesn't always work the way you think it should.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report