Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

How to create topo above building pad

8 ANTWORTEN 8
Antworten
Nachricht 1 von 9
archichan2
1492 Aufrufe, 8 Antworten

How to create topo above building pad

Is there a way to create topo above building pad???

 

I wanna make topo at yellow mark like this image. 

 

ww1.JPG

8 ANTWORTEN 8
Nachricht 2 von 9
ToanDN
als Antwort auf: archichan2

Tricky.

I think you will need to add it as an in-place mass or roof for 3d and sections. For plan view, you can copy paste the original topo in and split surface to get the exact piece. It will show inside of the building basement so you need to hide it somehow for any views affected.

Creating tunnels in a topo has been in the wishlists for a while.
Nachricht 3 von 9
archichan2
als Antwort auf: ToanDN

Thanks you for replying.

When i try to create In-place mass to replace topo, i can't paste original topo... Is this a way you said just before??  i tried two way using In-place and roof.  

 

r1.JPGr22.JPG

Nachricht 4 von 9
ToanDN
als Antwort auf: archichan2

If the mass suffices for presentation then no need to paste the topo. When I said it I meant to paste it outside of the mass as an actual topo to get the elevation contours.
Nachricht 5 von 9
Corsten.Au
als Antwort auf: archichan2

You can try a difference work flow.

1. Existing topo with Pads .. .( Keep this in LINK A File )

2. New proposed topo, variation, etc ( Keep this in MAIN file )

 

Main file - - - - -link - - - LINK A

this way, existing topo and pads will never interfere in your proposed

new drawings EVER... 

Corsten
Building Designer
Nachricht 6 von 9
archichan2
als Antwort auf: Corsten.Au

Hi ganesh Thanks for replying. 

 

I tried that way but it doesn't work....

Firstly, I made existing topo and pad to link A File. and then i insert this to New proposed topo. 

the result is like this image...

is that a way you said ??

re23.JPG

 

 

Nachricht 7 von 9
ToanDN
als Antwort auf: archichan2

Topo depth (elevation of poche base) is global among native and linked models so that you cannot have one base raised above another.
Nachricht 8 von 9
Corsten.Au
als Antwort auf: archichan2

Proposed topo should be modelled only on those places where there are modification ( fills )
( Existing + pads ) + new topo = final proposed

2. Option : You may keep existing topography completely separate, and don’t allow it to interfere in new design, proposed topography.. in this case you need to model a new topography with pads, changes etc..

New topography + pad = final proposed

It’s hard to integrated two topography to produce final drawings...
Corsten
Building Designer
Nachricht 9 von 9
archichan2
als Antwort auf: Corsten.Au

Thanks for replying. but I can't understand.. sorry... could you let me know with any images...?

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report