Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

How to constrain a family to a reference line that moves and rotates?

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
Prvoime
1242 Aufrufe, 3 Antworten

How to constrain a family to a reference line that moves and rotates?

I place a family on a reference line, when the reference line moves, rotation part work OK, but when I try to constrain it to the end of the reference line so that it stays at the end of the line, I get "constraints not satisfied".

Any idea what I'm doing wrong because I'm semi-certain I did this already in some other family and it worked (no idea how).

 

Here's a gif.

3 ANTWORTEN 3
Nachricht 2 von 4
syman2000
als Antwort auf: Prvoime

Do you mind upload the family?

Check out my Revit youtube channel - https://www.youtube.com/user/scourdx
Nachricht 3 von 4
ToanDN
als Antwort auf: Prvoime

One way to do it is adding a perpendicular ref line and lock it to the end of the original ref line, then lock the end of the family to this line.

See attached.

 

ToanDN_0-1643651451685.png

ToanDN_1-1643651472359.png

 

 

 

Nachricht 4 von 4
Prvoime
als Antwort auf: ToanDN


@ToanDN wrote:

One way to do it is adding a perpendicular ref line and lock it to the end of the original ref line, then lock the end of the family to this line.


Works, thank you very much!

 

How do people come up with these solutions?

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report