Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

how to attach wall to roof on a double gabled exterior

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
Anonymous
1036 Aufrufe, 2 Antworten

how to attach wall to roof on a double gabled exterior

Hello,

 

I have a floor plan that calls for two gables at the front corner of the house. However, I don't know how to attach the wall to the roof line where the larger gable is in line with the smaller gable (see below). The actual interior walls fill in the space (dark gray below the gable), however, the exterior brick facade cuts off where the wall is supposed to stop when viewed in a floorplan or overhead view. I'd appreciate any guidance. Thanks!

 

 

3D Gable.jpg

Floor Plan.jpg

2 ANTWORTEN 2
Nachricht 2 von 3
loboarch
als Antwort auf: Anonymous

You need to either add another wall to fill in the gable with the base offset to bring it up where it needs to be, or edit the profile of the wall there to extend into the gable. I would probably do a profile edit on the wall.


Jeff Hanson
Principal Content Experience Designer
Revit Help |
Nachricht 3 von 3
tnorris0722
als Antwort auf: loboarch

It may have been 2015 when you posted this, still very helpful in 2021. Editing the profile of the wall was so easy.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report