I was wondering if it’s possible to model something like this for walls for my project, if it’s possible on Revit (or if I have to use a different software)?
Thank you.
Solved! Go to Solution.
I was wondering if it’s possible to model something like this for walls for my project, if it’s possible on Revit (or if I have to use a different software)?
Thank you.
Solved! Go to Solution.
Solved by gokcen.ezgi.sen. Go to Solution.
Solved by barthbradley. Go to Solution.
Solved by ToanDN. Go to Solution.
Create a rope architectural column and array them. Or create a mass, divide surface, and apply a rope family as a pattern base.
Create a rope architectural column and array them. Or create a mass, divide surface, and apply a rope family as a pattern base.
Hello @21420597 ,
I agree with the comments made by @ToanDN and @barthbradley.
As a different method, if you know and like to use on Family Editor, you can find some ready-made family as in the link below and manipulate them according to you.
Ceiling Mounted Rope Trackway, 8 ropes
Let me know if you have more questions on this topic, otherwise please accept as a solution so that others can benefit from this information.
Best regards,
Gokcen Ezgi Sen
MSc. Architect - BIM Consultant
Hello @21420597 ,
I agree with the comments made by @ToanDN and @barthbradley.
As a different method, if you know and like to use on Family Editor, you can find some ready-made family as in the link below and manipulate them according to you.
Ceiling Mounted Rope Trackway, 8 ropes
Let me know if you have more questions on this topic, otherwise please accept as a solution so that others can benefit from this information.
Best regards,
Gokcen Ezgi Sen
MSc. Architect - BIM Consultant
@gokcen.ezgi.sen @barthbradley @ToanDN Thank you! I’ll check these out
@gokcen.ezgi.sen @barthbradley @ToanDN Thank you! I’ll check these out
Can't find what you're looking for? Ask the community or share your knowledge.