Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Help! How do I see a floor plan greyed out on another floor plan elevation?

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
Anonymous
4284 Aufrufe, 3 Antworten

Help! How do I see a floor plan greyed out on another floor plan elevation?

I'm designing a 1800sqFt bungalow and from my foundation level to the entry level I could see the floor plan for the foundation from the entry level floor plan to trace over etc.. but when I Goto my roof level (one above entry level) how come I can't see the floor plan to begin the roof? Regards, Tyler.
3 ANTWORTEN 3
Nachricht 2 von 4
Anonymous
als Antwort auf: Anonymous

Please check your underlay settings on the preperties screen of the view. 

Nachricht 3 von 4
Anonymous
als Antwort auf: Anonymous

Got it thanks, also do you supposively know how to delete a part of a floor
so I can have stairs from foundation to entry level?

--
~~~~~
This is a student email account managed by Niagara Catholic District School
Board. The contents of this email are governed by the laws of the state and
the board policies of the school district.
Nachricht 4 von 4
RDAOU
als Antwort auf: Anonymous

@Anonymous

 

  1. You can select the floor >> Edit Profile >> shape the floor boundaries the way you want around where the stair will be; then finish sketch mode
  2. You can use tools like "Shaft Opening" from the ribbon to cut floors and make stairwells
  3. You can use a Model In-Place void to cut the floor
  4. You can use a face or floor based generic Void Family which you load into the project and cut with

and the list can be longer...option 1 should do though

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report