Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Fill/Cut doesnt show on split surface

1 ANTWORT 1
Antworten
Nachricht 1 von 2
Anonymous
372 Aufrufe, 1 Antwort

Fill/Cut doesnt show on split surface

 Hi everyone!

 

For my project I created the topography to include the surroundings, thats why I splitted the surface to only get the numbers from my ground, but when i do that, the cut and fill calculation doesnt show for the graded region. When I do it without splitting the surface and creating a graded region, I get the calculations of the cut volume from the existing building pads of the neighboring buildings, which is obviously not ideal. 

 

I dont know if my explanation is understandable, i hope it is.

 

In the picture I´m clicking on the graded region, the yellow transparent volume is the existing topography, and one can see de volume difference between them. (the pads of the neighboring buildings were created in the existing phase)

 

 

Does anyone have an idea on how to get around it ???

 

Thanks for the help :leicht_lächelndes_Gesicht:

 

Bild1.pngBild2.png

1 ANTWORT 1
Nachricht 2 von 2
ToanDN
als Antwort auf: Anonymous

If you cut and paste the surrounding topo and building pads to a new file and link it in, then you can report the Cut/Fill of of your project site.

 

Image 1 is before Cut and paste.  Image to is after, and linked in.

 

 

Capture1.PNGCapture.PNG

 

Edit:  I tried again with out linking, and while it did not report Cut/Fill in the Properties, it did in the schedule.

 

Capture2.PNG

 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report