Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Family Stretch Parameters/Controls - Grips Not Working Properly

1 ANTWORT 1
Antworten
Nachricht 1 von 2
antcav501
730 Aufrufe, 1 Antwort

Family Stretch Parameters/Controls - Grips Not Working Properly

Hi there,

 

I am stuck with a small issue, yet I cannot seem to figure out what is wrong or what I need to do. I have tried everything I could think of, but still cannot get my "block" to work.

 

I created a Corner Base Filler family for casework, where two (2) cabinets are edge to edge in a corner of a room. So I have this corner filler that will be placed in the corner where the two (2) cabinets meet.  The thing is I was able to get the one edge of the filler to work, so that I can control it and have it be any length.  I cannot get the other edge to do the same thing.  Any advice, input, or solutions is greatly appreciated!

 

I have the family attached, I am using Autodesk Revit 2017.

1 ANTWORT 1
Nachricht 2 von 2
ToanDN
als Antwort auf: antcav501

Your family elements are not constrained properly.

 

Capture.PNG

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report