Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

family insertion point

5 ANTWORTEN 5
GELÖST
Antworten
Nachricht 1 von 6
Anonymous
15218 Aufrufe, 5 Antworten

family insertion point

How can I change teh insertion pointt of a family?

5 ANTWORTEN 5
Nachricht 2 von 6
tuuletin
als Antwort auf: Anonymous

Hello, dear

insertion point of a family is the intersection point of base reference planes in your family.

Just open your family and move your family geometry from the intersection towards the desired place.

Nachricht 3 von 6
ennujozlagam
als Antwort auf: Anonymous

 

Hi From the properties of the reference planes in the Revit Family!

In a Revit Family when you click on a reference plane and go to its properties you will see a property called ‘Defines Origin’ – the point at which two origin defining reference planes intersect becomes the insertion point of the Revit Family.

 

aa.JPG





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 4 von 6
Teresa.KawaguchiGUSLM
als Antwort auf: Anonymous

I have a detail family with original reference planes (top and center) set, but in the project, the insertion point is not right. Any suggestions? 

Nachricht 5 von 6

In the detail family

TeresaKawaguchiGUSLM_0-1686584355164.png

 

 

In the project 

TeresaKawaguchiGUSLM_1-1686584403218.png

 

Nachricht 6 von 6
RSomppi
als Antwort auf: Anonymous

Is the symbol nested in the family that you are using?

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report