Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Extrusion / sweep path not perpendicular to the profile?

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
Anonymous
2093 Aufrufe, 2 Antworten

Extrusion / sweep path not perpendicular to the profile?

Dear Forum Users,

 

I would like to know if there is any way in Revit (Dynamo-script very welcome if applicable) to create an extrusion/sweep whose extrusion vector / path is not perpendicular to the profile?

 

I am attaching an image for better understanding.

 

Revit extrudes a profile in the direction perpendicular to the profile as shown below:

1st image.JPG

 

However, I would like to extrude my profile in the direction which is not perpendicular to the profile, as shown below:

2nd image.JPG

 

It might be an extrusion or a sweep. At worst a free form. 

 

I would appreciate any ideas.

 

Kind regards,

Maciej

 

 

 

2 ANTWORTEN 2
Nachricht 2 von 3
ToanDN
als Antwort auf: Anonymous

Use Sweep blend.

 

Capture.PNG

Nachricht 3 von 3
Ilic.Andrej
als Antwort auf: Anonymous

 



Andrej Ilić

phonetical: ændreɪ ilich
MSc Arch

Autodesk Expert Elite Alumni

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report