Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

EXTRUSION COMBINED RAMP AND STAIRS

7 ANTWORTEN 7
Antworten
Nachricht 1 von 8
Anonymous
1349 Aufrufe, 7 Antworten

EXTRUSION COMBINED RAMP AND STAIRS

Hi there,

Can anyone please have a quick look of my revit file?

Which type of extrusion shall I use so that the ramp is visible?

Please see attached file.

Thanks a lot  

7 ANTWORTEN 7
Nachricht 2 von 8
barthbradley
als Antwort auf: Anonymous

I don't understand what the finished product is supposed to look like.  Can you post a picture or sketch of what you are after?  

 

Extrusion.jpg

 

 

Nachricht 3 von 8
Anonymous
als Antwort auf: barthbradley

Hi Barth,

Lovely to hear that you could help me. You are very good. I have attached photos to help you understand what I tried to create. Unfortunately this guy does not speak English and the video was not written in English. It was hard to figure out if I followed his instructions correctly. 

Nachricht 4 von 8
barthbradley
als Antwort auf: Anonymous

I don't see a way to do that here.  

 

Ramp2.jpg

Nachricht 5 von 8
Anonymous
als Antwort auf: Anonymous

This is the video link:

https://www.youtube.com/watch?v=N412PozkQpk&t=123s

How would you do it?

Nachricht 6 von 8
barthbradley
als Antwort auf: Anonymous


@Anonymous wrote:

This is the video link:

https://www.youtube.com/watch?v=N412PozkQpk&t=123s

How would you do it?


 

 

I wouldn't do it because there is not enough room to build it.  

Nachricht 7 von 8
Anonymous
als Antwort auf: barthbradley

Yes there is enough room. I have checked with tutor. My friend did it

Nachricht 8 von 8
barthbradley
als Antwort auf: Anonymous


@Anonymous wrote:

Yes there is enough room. I have checked with tutor. My friend did it


 

Your friend did what?  

 

This?

 

Stair-Ramp.jpg

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report