Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Export IFC 2x4 with Revit 2017

1 ANTWORT 1
Antworten
Nachricht 1 von 2
Anonymous
855 Aufrufe, 1 Antwort

Export IFC 2x4 with Revit 2017

Hallo,

 

i want to test the IFC 2x4 REFERENCE VIEW Export of Revit 2017

So i have this Results:

 

Revit Model: Revit.PNG IFC Import Revit: Revit IFC 2x4 Reference View LOD LOW.PNG

 

IFC IMPORT DDS CADDDS Viewer IFC 2x4 Reference View LOD LOW.PNG IFC IMPORT SOLIBRI: Solibri IFC 2x4 reference view lod low.PNG

 

LINk original Revit and IFC FILE: https://drive.google.com/open?id=0BzdCZQQXy21_NzFlM0ZxejU0TjA

I have the same Problem in the design View.

Is the Problem in Revit because a bad Export of ifc 2x4? or in the Viewer? or in the Model?

 

1 ANTWORT 1
Nachricht 2 von 2
pipapongo0909
als Antwort auf: Anonymous

hi,

 

i do not know if this helps but did you configure your IFC export settings?

the OOTB settings convert a lot to "generic model" or are set to "do not export"

 

"... there’s a map defined to export different categories from Revit to IFC...."

see this link: Myth Buster: Revit & IFC

 

schönes w.e.

 

Jeff



Jeff Wurth
BIM Manager | Dipl Ing. Bauingenieur
LinkedIn

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report