Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

ETFE Cushion roof

5 ANTWORTEN 5
Antworten
Nachricht 1 von 6
yazanhijazeen
1138 Aufrufe, 5 Antworten

ETFE Cushion roof

Hello everyone, 

i am trying here to model a cushion roof like this one: 

yazanhijazeen_0-1632771423184.png

so i went on testing and was a bit close to what i need,

yazanhijazeen_1-1632771814119.png

1: i drew a curved mass 

2: V grid applied

3: U grid applied

4: U&V grid applied

 

I then created a (general model based on grid- Fassadelement) and load it into the model.

yazanhijazeen_2-1632772209195.png

 

as you can see when i placed the family in the grid, the roof behaved differently, as in V grid roof, it acted the right way, but not the as same as in U grid roof, the roof went back to its normal shape and that is not not what i need, 

yazanhijazeen_3-1632772440630.png

yazanhijazeen_4-1632772464398.png

i googled the problem, but couldn't figure out the problem, can someone help me, please?

 

thank you 

5 ANTWORTEN 5
Nachricht 2 von 6
RDAOU
als Antwort auf: yazanhijazeen

@yazanhijazeen 

 

Use an Adaptive Algemeinesmodel + Divided suface >>> Show nodes and use repeaters

 

Works better for fluid shaped structures

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Nachricht 3 von 6
ToanDN
als Antwort auf: yazanhijazeen

You need 6 points or more adaptive points to create the bow in the long direction.

 

ToanDN_0-1632775139384.png

 

Nachricht 4 von 6
barthbradley
als Antwort auf: yazanhijazeen

This?

 

ETFE.png

Nachricht 5 von 6

Hi, sorry to bump up a 1year+ old topic, I am trying to model the same ETFE panel and I need a rectangular frame but I can't understand how to create it in the pattern based family since I don't have any modelling tool to use.

 

Thanks for any help

Nachricht 6 von 6

Checkout videos on YT by RV boost on etfe modelling with adaptive family.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report