Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Entry door on unit group

1 ANTWORT 1
Antworten
Nachricht 1 von 2
yes_and_no
165 Aufrufe, 1 Antwort

Entry door on unit group

Moving from entitlement to pre-design and even schematic we still use floor as unit/group without walls and entry. At this point in time an entry usually needed to drive circulation, egress, etc. yet the unit still changing, and 65% chance it will. Our people spent time adding the unit walls and add that entry, and very often turn out the unit will no longer be used.

I wonder what others use in multifamily project to add an entry into the group (assuming they use floor) without laboring adding the walls.

 

1 ANTWORT 1
Nachricht 2 von 2
ToanDN
als Antwort auf: yes_and_no

I don't see adding some walls being laborious.  But if you want to add doors without walls then do one of the following:

- place a non-host door family

- create a curtain wall type with a curtain wall door as the panel, place a curtain wall the same size as the door then you only see the door

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report