Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Elevations showing incomplete roof?

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
laurenburley
2486 Aufrufe, 3 Antworten

Elevations showing incomplete roof?

Hey guys, trying to render elevations but the roof lines are incomplete and I have no Idea why..

 

3D view looks totlly complete and fine. Just the elevations are messed up...

 

Any advice?

 

Screen Shot 2015-05-08 at 1.15.18 pm.png

Screen Shot 2015-05-08 at 1.15.25 pm.png

3 ANTWORTEN 3
Nachricht 2 von 4

Perhaps Far Clipping is activated and its offset is too small..

  1. in Elevation View : Properties >Extents > Far Clipping - change it to No Clip or , if you keep clipping , increase the Far Clip Offset
  2. the Far Clipping Offset , can be controlled in Plan View by dragging the limit grafically the Elevation Building marquee using arrows 

Image 2.png

 

 

 

 

 

Image 3.png

 

 

Constantin Stroescu

EESignature

Nachricht 3 von 4
Anonymous
als Antwort auf: laurenburley

Thank you

Nachricht 4 von 4
Oyamaefache
als Antwort auf: constantin.stroescu

Thank you so much sir!!!!!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report