Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Elevation tag arrows are missing but still linked to elevation views.
Elevation tag arrows are missing but still linked to elevation views.
All of the interior elevations in my project are broken. They have lost the arrows but are still linked to the elevation views. On top of that elevation tags are showing in all views regardless of where the tag was placed. So interior elevation bubbles placed on the 4th floor are showing up on the first floor and every other floor plan view.
try create a new view -> Elevation -> Check the box that says "reference another view" and pick a view that I already created to reference.please see attached.
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Are the elevations the same Phase as the floor plans?
If your elevation tags show on multiple levels then the boundary of your elevations span those levels. Open the elevation views and stretch the boundary to its correct extent and that should fix your problem.
