Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Elevation markers in imported models

6 ANTWORTEN 6
GELÖST
Antworten
Nachricht 1 von 7
Anonymous
772 Aufrufe, 6 Antworten

Elevation markers in imported models

Hello,

 

I'm working on a project with multiple structures. I like to work on the buldings separtly by just importing them in to one file when needed. Is there a way to get rid of the elvation markers on the imported model?

 

Hope this make sense :leicht_lächelndes_Gesicht:

 

Thanks

 

/Rickard 

 

 

 

Elevation.jpg

6 ANTWORTEN 6
Nachricht 2 von 7
ToanDN
als Antwort auf: Anonymous

VG, RVT links display, basic tab, change from by Host View to Custom, annotation tab, untick Levels category.
Nachricht 3 von 7
Anonymous
als Antwort auf: ToanDN

Thank you very much!

Nachricht 4 von 7
ennujozlagam
als Antwort auf: Anonymous

hello, you don't need to import, you can use Revit link, link the file to your project then go to your properties >  visibility graphics overrides > revit link > dispaly setting > change to custom > annotation categories > change to custom > untick levels. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 5 von 7
Anonymous
als Antwort auf: ennujozlagam

That's even better :leicht_lächelndes_Gesicht:

Nachricht 6 von 7
ennujozlagam
als Antwort auf: Anonymous

@Anonymous  

 

That's nice you marked your own question as a solution. Thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 7 von 7
Anonymous
als Antwort auf: ennujozlagam

Fixed it, sorry about that!

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report