Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Electrical Legend Components (Switches & Receptacles) Do Not Print Properly

1 ANTWORT 1
Antworten
Nachricht 1 von 2
aganem5DK9J
998 Aufrufe, 1 Antwort

Electrical Legend Components (Switches & Receptacles) Do Not Print Properly

Hello,

 

Some of my custom electrical legend components (switches & receptacles with annotation text) do not print properly with vector processing but print completely fine with raster processing. Printing in raster is not an option due to quality loss, and I spent numerous hours of trying to work around this glitch. Also, using standard Revit receptacles in not an option either, because our Revit standards must match our existing CAD standards, and we have been doing a good job so far... 

 

The strange part is that the issue is only when printing using vector processing. Inside of Revit, everything looks perfect, and same goes for when printing using raster proccessing.

 

 

Please see attached screen shots (I tried attaching the family to this post, but this forum will not allow me...)

 

 

Any ideas? Thanks in advance.

1 ANTWORT 1
Nachricht 2 von 2
Anonymous
als Antwort auf: aganem5DK9J

Is any one else having similar issue? I can't figure this out :ausdrucksloses_Gesicht:

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report