Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Duct Connectors

2 ANTWORTEN 2
Antworten
Nachricht 1 von 3
mphungDCHNW
161 Aufrufe, 2 Antworten

Duct Connectors

Hi,

 

Does anyone know how to centerdt.JPG a duct connector on any given shape in Revit. The picture down below shows the shape with the duct connector in the center of the bottom circular shape however I don't want that rectangle to be there and if I remove it I lose the connectors. The connector right next to it is on the face I want however when I placed it on the face/plain it is not in the center.

 

Any thoughts ?

2 ANTWORTEN 2
Nachricht 2 von 3
ToanDN
als Antwort auf: mphungDCHNW

I can't replicate your problem.  A connector placed on a face will be automatically centered.

 

ToanDN_0-1655827790897.png

 

Nachricht 3 von 3
barthbradley
als Antwort auf: mphungDCHNW

Select the Connector and press Pick New Host on the Contextual Ribbon and host it to something other than the rectangle.   

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report