Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Draw arc

11 ANTWORTEN 11
GELÖST
Antworten
Nachricht 1 von 12
Anonymous
870 Aufrufe, 11 Antworten

Draw arc

Good morining, 

 

trying to draw an arc on east side g my project but I can't. 

 

When finish the skecth Revit say me " boundaries are not satisfied". 

 

On south side instead I got.

 

See screenshot and .rvt please. 

 

Thank's

 

 

11 ANTWORTEN 11
Nachricht 2 von 12
Anonymous
als Antwort auf: Anonymous

. rvt

Nachricht 3 von 12
Anonymous
als Antwort auf: Anonymous

Can't put the wall in correct position.

Nachricht 4 von 12
Anonymous
als Antwort auf: Anonymous

When approach the sparrow on the pillar give error

Nachricht 5 von 12
Anonymous
als Antwort auf: Anonymous

Are you editing the profile of the wall or using the opening tool?  In this case I would use a wall based generic model with the opening.

Nachricht 6 von 12
Anonymous
als Antwort auf: Anonymous

Edit the profile. 

How command can I use to do an arc?

 

Thank's

Nachricht 7 von 12
Anonymous
als Antwort auf: Anonymous

There is a problem between the wall of the angle.

Nachricht 8 von 12
Anonymous
als Antwort auf: Anonymous

@ToanDN can you help me please?

Nachricht 9 von 12
ToanDN
als Antwort auf: Anonymous

I would follow @Anonymous advice.
Nachricht 10 von 12
Anonymous
als Antwort auf: ToanDN

With which command?

 

Opening wall?

 

 

Nachricht 11 von 12
Anonymous
als Antwort auf: Anonymous

Just copy one of your other walls that has the edited profile...Wall opening is square only....you would have to use a wall based family.

Nachricht 12 von 12
ToanDN
als Antwort auf: Anonymous

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report