DOOR JAMB

[Anonymous]

I have tried to make the doors fir in a thin wall which is only 70 mm thick so I edited the wall thickness in the family editor. However the problem here is that there is a gap between the door jamb and the wall as seen in the image below. I have also attached the file for perusal.  

[Corsten.Au]

Hi..

The door family needs to be corrected.

I have attached one Door family, you can use the same or

follow the constraints used in that.

Cheers!

[barthbradley]

My suggestion is that you download and dissect a door family from one of the many manufacturers that offer Revit content (Marvin, Pella, etc.). 

[ToanDN]

Any OOTB door family should work fine for various wall thicknesses.