Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

DOOR ANGLE LINE

3 ANTWORTEN 3
GELÖST
Antworten
Nachricht 1 von 4
dm0144
355 Aufrufe, 3 Antworten

DOOR ANGLE LINE

Hello everyone

 

How can I add a model line (2D) in the family that follows the angle parameter of the door swing, so the line is drawn depending on the angle at which the swing is open?

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: dm0144

https://www.youtube.com/watch?v=GnbedLNopP4

 

https://www.youtube.com/watch?v=pkeai4uxXRk





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
RDAOU
als Antwort auf: dm0144

@dm0144 

 

If it is only an arc and a line (Single lines) it is quite simple...add Symbolic lines in the door family (No need to nest anything)

 

door swing.gif

 

 

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Nachricht 4 von 4
dm0144
als Antwort auf: ennujozlagam

The first tutorial is what I was looking for.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report