Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Detail Item: Several Views

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
XXalessio.amodioXX
299 Aufrufe, 3 Antworten

Detail Item: Several Views

Hi all,

I want to create a 2D Detail Item for Steel detailing scale 1/10 (I do not want to overmodel).

The detail is a "L" Flange. The Flange will be visible in Several views" (E.g. Floor Plan, Elevation, Section).

 

By your experience, it is more convenient to create 3 Different Detail Item Families or One Family with 3 different Types (Visualization checkBoxes)?

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: XXalessio.amodioXX

instead of drafting views, you can create a legend and can be drag to different sheets. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
XXalessio.amodioXX
als Antwort auf: ennujozlagam

Hi.

Please try to answer to my post. I am asking wich could be the best way to create a Detail Item.

Nachricht 4 von 4
cbcarch
als Antwort auf: XXalessio.amodioXX

Create your 2D L-Flange Detail family.

Then try placing it in a Plan, Section and Elevation View. Does it work?

Cliff B. Collins
Registered Architect The Lamar Johnson Collaborative Architects-St. Louis, MO

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report