Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Detail Components in Generic Model

6 ANTWORTEN 6
GELÖST
Antworten
Nachricht 1 von 7
bd2427
1901 Aufrufe, 6 Antworten

Detail Components in Generic Model

We have a super tower project with all adaptive panels. We now are trying to get mullion details to be shown on all the plans (just like if you use a normal curtain wall family with detail components embedded within the profile family). But non annotation families work in adaptive components. Is there a way to work this out or do I have to place them in in the project manually for all 70 floors?

 

adaptive components.JPGmullion detail.JPG

6 ANTWORTEN 6
Nachricht 2 von 7
ToanDN
als Antwort auf: bd2427

Place them in views.  You only need to show those in large scaled details.  Or are you wanting to show them everywhere, tiny sections and all?

Nachricht 3 von 7
bd2427
als Antwort auf: ToanDN

Yeah. we are trying to get them shown up everywhere, including all floor plans in different scales.

 

Nachricht 4 von 7
ToanDN
als Antwort auf: bd2427


@bd2427 wrote:

Yeah. we are trying to get them shown up everywhere, including all floor plans in different scales.

 


Then you have to place them directly in project views.  Utilize arrays, detail groups, repeating detail components as much as you can.

Nachricht 5 von 7
constantin.stroescu
als Antwort auf: bd2427

  • Make a Mullion Profile Family in which nest a Detail Item with a detailed section view. 
  • create a closed Profile to be used for Course and Medium Detail Level and in 3d views
  • from Visibility Settings make visible the Detail Item only in Fine Detail Level
  • Load into Project 
  • Everytime you have a plan view you can choose the Level of Detail

1.png1b.png2.png3.png

 

Constantin Stroescu

EESignature

Nachricht 6 von 7
ToanDN
als Antwort auf: constantin.stroescu

@constantin.stroescu

 

Are you sure that works for Adaptive family or curtain panel pattern based?

Nachricht 7 von 7
constantin.stroescu
als Antwort auf: ToanDN

No , I am not , I,ve used it for Curtain Walls and Curtain Wall System but I didn't try it for Curtain Panel Pattern Based yet....

Constantin Stroescu

EESignature

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report