Curved Ramp

[Anonymous]

Hello--

I am totally new to Revit...basically teaching myself with this project. I need to create a ramp that goes from -1 level to ground, 12 feet up. I have created the walls for the path but I cannot, for the life, figure out a ramp. I have tried but I guess I don't understand how it works. I tried making a straight path with switch backs but I can't get that to work well either and that's not the design I want anyway. I copied the path of the ramp into a new file, which I have attached.

Thanks

[ryan.duell · Accepted solution]

You should be able to start the ramp tool, and manually draw the boundary lines if you need to utilized curved geometry.  I have included a few additional resources below I hope are helpful:

Adding a Ramp

http://docs.autodesk.com/subscription/REVIT/2011/ENU/filesUsersGuide/WS73099cc142f4875513fb5cd10c4aa...

AUGI – Curved Sloped Ramp

http://forums.augi.com/showthread.php?t=17290

Ramps in Revit – Revit City

http://www.revitcity.com/forums.php?action=viewthread&thread_id=21609

Hope this helps,

You should be able to start the ramp tool, and manually draw the boundary lines if you need to utilized curved geometry.  I have included a few additional resources below I hope are helpful:

Adding a Ramp

http://docs.autodesk.com/subscription/REVIT/2011/ENU/filesUsersGuide/WS73099cc142f4875513fb5cd10c4aa...

AUGI – Curved Sloped Ramp

http://forums.augi.com/showthread.php?t=17290

Ramps in Revit – Revit City

http://www.revitcity.com/forums.php?action=viewthread&thread_id=21609

Hope this helps,

[Anonymous]

[Anonymous]

TY

[Anonymous]

Try this link out, very, very helpful.

http://www.youtube.com/watch?v=5GaIarzxYPQ&feature=youtu.be