Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Creation of family of panels bended at the bottom

1 ANTWORT 1
Antworten
Nachricht 1 von 2
Anonymous
246 Aufrufe, 1 Antwort

Creation of family of panels bended at the bottom

Hi!

I was having trouble to create a family of panels that have a bending at the bottom, as shown in the picture.

I have been told to look into Adaptive components, but since I have never used such command prior to this moment I have no idea on how to operate.

Thanks in advance!

Capture.png

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: Anonymous

I would do them as Curtain Panels.  

 

35 second quickie:

 

CWP.png

 

...okay, maybe a minute and 35. :zwinkerndes_Gesicht:

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report