Creating louvers

Creating louvers

kecix3c
Contributor Contributor
2,204 Views
3 Replies
Message 1 of 4

Creating louvers

kecix3c
Contributor
Contributor

Hello guys, 

 

I trying to create a family for louver.  Can someone help me to figure this. i would like to create the louvers blade in between the overall witdh (overall witdh - 3900). i dont know how to use the formula.

0 Likes
Accepted solutions (1)
2,205 Views
3 Replies
Replies (3)
Message 2 of 4

constantin.stroescu
Mentor
Mentor
Accepted solution

If you want to place the blades at an equal distance from the Overall Width limits , then it can be done with this configuration:

Image 1.png

Constantin Stroescu

EESignature

Message 3 of 4

Keith_Wilkinson
Advisor
Advisor

make sure you do it as Constantin has done here and nest your louvre family into the main family - trying to directly array an extrusion is fraught with problems.  You will find it much easier to control the lenght etc.

 

K.



"Give a man a fish and you feed him for a day; teach a man to fish and you feed him for a lifetime."
Maimonides
Message 4 of 4

kecix3c
Contributor
Contributor
This is really help! thanks
0 Likes