create a custom fill pattern (2017)

[jledgewood409]

i have this cmu pattern that I would like to make a fill pattern. wondering what the best way to go about getting this done. I have attached a .dwg with lines & dimensions that represent the pattern I would like

[hugha · Accepted solution]

Try this:

;-------------------------------------------------------------------------------
;        Written by HatchKit Professional
;        HatchKit Professional (c)1990-2016 Cadro Pty Ltd
;        www.hatchkit.com.au/
;-------------------------------------------------------------------------------
;-Date                                   : 13/10/2016
;-Time                                   : 4:39:10 PM
;-HatchKit Version                       : 3.1.9.2674
;-HatchKit Output Filetype               : Revit with HatchKit Add-In
;-HatchKit Licensed To Name              : hugh adamson
;-------------------------------------------------------------------------------
;%VERSION=3.0
;%UNITS=INCH
*Entities,DXF Entity Section
;%TYPE=MODEL
180,16,8,0,-16,16,-16
180,0,4,0,-16,16,-16
90,0,0,0,-32,12,-4
90,-16,0,0,-32,12,-4
90,8,12,0,-32,4,-12
90,-8,12,0,-32,4,-12
180,-8,16,0,16
180,-8,12,0,16

hth,

Hugh Adamson

www.hatchkit.com.au