Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Constrain

1 ANTWORT 1
GELÖST
Antworten
Nachricht 1 von 2
mishkt
201 Aufrufe, 1 Antwort

Constrain

Hello,

 

How to constrain mullion to model line of divided form.

 

I've created mass. Then I've divided surface of this mass and applied to the surface a panel. Lines of this divided surface are not a right angle. Mullions of this panel in the mass created at a right angle. But I need to constrain these mullions to lines, which are not at a right angle.

 

I attached a image.

 

Screenshot (240).png

 

1 ANTWORT 1
Nachricht 2 von 2
RDAOU
als Antwort auf: mishkt

@mishkt 

 

You our need to model the mullions using several profiles hosted on points which are hosted along a Spline through points...using one profile and 1 line to seeep the profile along is not enough... the mullion will break when slightly twisted

YOUTUBE | BIM | COMPUTATIONAL DESIGN | PARAMETRIC DESIGN | GENERATIVE DESIGN | VISUAL PROGRAMMING
If you find this reply helpful kindly hit the LIKE BUTTON and if applicable please ACCEPT AS SOLUTION


Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report