Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Configuring Revit Families

1 ANTWORT 1
Antworten
Nachricht 1 von 2
Anonymous
244 Aufrufe, 1 Antwort

Configuring Revit Families

I have finally mastered how to model components in SolidWorks and convert them into Revit!

 

I am now wondering can I change the sizes of these families when loaded into Revit?.

 

I know in SolidWorks I can have a number of configurations for one component, but can this be done after it is loaded into Revit, or will I always have to change the sizes in SolidWorks and then reload the family?

 

For example, I am modelling HEPA filters to be 595x595mm, but would also like to change this to 650x650mm.

1 ANTWORT 1
Nachricht 2 von 2
Alfredo_Medina
als Antwort auf: Anonymous

In Revit, those multiple variations are handled with a type catalog, or a lookup table. See the help documents for more info.


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report