Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Color temperature for Initial color for Lighting fixture

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
sureshchotrani
324 Aufrufe, 4 Antworten

Color temperature for Initial color for Lighting fixture

Can I set below 1700K for color temperature? Or Revit cannot set below 1800K

 

Untitled.png

Beschriftungen (1)
4 ANTWORTEN 4
Nachricht 2 von 5
CanutoDesign
als Antwort auf: sureshchotrani

The color temperature of 1700K would give your fixture less light than a single candle flame. See color temp chart below for reference. It would light up but not have any effect on surrounding surfaces and would only be seen in a pitch black condition. 

If something like this needed to be rendered, I'd recommend on a post rendering touchup.

canutoCKBZ7_0-1670520700641.png

 

Nachricht 3 von 5
sureshchotrani
als Antwort auf: CanutoDesign

My question is, is it possible to enter value below 1800K, as it gives warning see the number 4 in image.

Nachricht 4 von 5
CanutoDesign
als Antwort auf: sureshchotrani

Revit doesn't have that capability to best of my knowledge.

Nachricht 5 von 5
ToanDN
als Antwort auf: sureshchotrani

No.  Add a Color Filter if you want the effect.

 

ToanDN_0-1670523509172.png

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report