changing roof pitch is breaking my roof

[justinbourne.design]

After much help from this forum I got this hip roof condition to work, it is actually two roofs which you will notice. Well of course things have changed and now instead of 5/12 pitch we need to make a 10/12 pitch (front to back), the hipped ends would ideally stay at 12/12. However when adjusting the 5/12 slopes to be 10/12 revit says it cannot make the roof.

I wish revit would just show what monstrosity comes out with the values I give it so I could have a better idea of what "doesnt work".

Any guesses?

[ToanDN · Accepted solution]

Like this?

[justinbourne.design]

thats correct! how did you do it?

[ToanDN · Accepted solution]

---

@justinbourne.design wrote:

thats correct! how did you do it?

---

Nothing special.  Just a roof by footprint with a slope at each edge as you indicated.

[justinbourne.design]

I guess it was just a case of deleting the old roof and re drawing it, not sure why I couldnt just adjust the first one but whatever.