Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Change stair stringer to PFC member

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
Anonymous
958 Aufrufe, 3 Antworten

Change stair stringer to PFC member

Hi,

What's the best way to change the section profile of a stair stringer to a PFC member? And is it possible for the stringer to be a structural member as opposed to architectural?

 

I've tried loading a structural framing PFC member into the family of the Section Profiles for stairs however it refused to load because it was a structural member.

 

Screen grabs attached for clarity.

 

Thanks,

Joe

3 ANTWORTEN 3
Nachricht 2 von 4
ToanDN
als Antwort auf: Anonymous

You just need the profile family, not the actual structural member family. Edit the stringer type and assign the profile to it.
Nachricht 3 von 4
Anonymous
als Antwort auf: ToanDN

The trouble I have is that there is no PFC section in the Profile Family. So is there a way to modify the PFC section family from a Structural Framing family to the Profiles family (See Capture3 screen-grab attached)?

Nachricht 4 von 4
ToanDN
als Antwort auf: Anonymous

Does the framing family have a nested profile family? If so, you can edit the family and load it directly to your project and use it for the stringer definitions.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report