Change Door Insertion Point

Change Door Insertion Point

domhnall.omahoney
Participant Participant
591 Views
1 Reply
Message 1 of 2

Change Door Insertion Point

domhnall.omahoney
Participant
Participant

I have built a set of doors for a project, with the alignment to the inside of the wall.  However, the materials used for the walls will have limited tolerances.  Is there a way to move the doors to the centre of the wall?  In my head there should be a way to set up a parameter to change the insertion position but I cant find a specific guide on how to do so

 

 

Capture.PNG

 

0 Likes
592 Views
1 Reply
Reply (1)
Message 2 of 2

ToanDN
Consultant
Consultant

Open an OOTB door family and you can see there is Inset parameter to set the location of the door within the wall thickness.  

 

ToanDN_0-1677086918187.png

 

 

 

 

 

0 Likes