Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Can't offset curb in surface

1 ANTWORT 1
Antworten
Nachricht 1 von 2
stsoleridou
214 Aufrufe, 1 Antwort

Can't offset curb in surface

Hi guys,

I have some issues when I add a curb profile, as you will see in the attached photo. 

21121_LI.jpg

This curb was made with railing.

First I insert it in a base view and then I change the host and make an offset so that the curb followes the surface.

When I add another profile and try to make an offset it shows an error and says you can't create railing.

Any ideas? 

1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: stsoleridou

Is that a Floor the curb is following in your screenshot? What about using a Floor Slab Edge, instead of Railing, to model your curbs?  

 

...or do you mean "Surface" as in Toposurface?  In other words, you are hosting Railing to a Toposurface.  

 

 

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report