Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Can't bind a linked model?

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
roedigerF6NSW
284 Aufrufe, 4 Antworten

Can't bind a linked model?

See attached error message in Revit. I'm trying to link a model and then bind it but getting this error message. Has anyone dealt with this and have any advice? 

4 ANTWORTEN 4
Nachricht 2 von 5
hmunsell
als Antwort auf: roedigerF6NSW

I assume the first reason (no 3D elements) is not valid :-). So, there must be some issues with something in the model. Would you be able to upload the model for us to look at?

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


Nachricht 3 von 5
roedigerF6NSW
als Antwort auf: hmunsell

Here you go

Nachricht 4 von 5
hmunsell
als Antwort auf: roedigerF6NSW

thats a nice looking model :-). 

 

i have the same issues binding into my model. id recommend going into that models and ungroup all the model groups and clean up as many of the detail groups that you can. id also start going thru any families that were downloaded from vender/Manufacturer site's and see if any of them could be causing the issue. 

 

When i opened the in 2023 i got a couple errors you may want to look into also. 

hmunsell_0-1702582308637.png

 

Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.



EESignature


Nachricht 5 von 5
barthbradley
als Antwort auf: roedigerF6NSW

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report