Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Calculate excavation and backfilling

1 ANTWORT 1
Antworten
Nachricht 1 von 2
amr.atiya
1536 Aufrufe, 1 Antwort

Calculate excavation and backfilling

Hello All, 

I have a building (Underground Tunnel) Modeled in Revit as floors and walls. I have the survey from the site excavation imported as a toposurface. The toposurface in some places was not excavated enough and in some places excavated more. Is there a way to know the quantities of the needed excavation and back filing from the Revit?

Thanks in Advance it will help me a lot. 

Beschriftungen (2)
1 ANTWORT 1
Nachricht 2 von 2
barthbradley
als Antwort auf: amr.atiya

Do you have a Toposurface, Graded Region Copies and Phases? 

 

Calculating/Scheduling excavation and backfill requires a "source" Toposurface followed by a  Graded Region Copy of that "source" Toposurface placed in a subsequent Phase of construction. 

 

 This is not an easy process to explain in a short post, but there are plenty of tutorials available on line to read and watch. 

 

Start here:

 

toposurface | Learning Revit Online

 

About Reporting Cut and Fill Volumes on a Site | Revit Products 2016 | Autodesk Knowledge Network

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report