Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

beam system over multicurve beam

3 REPLIES 3
SOLVED
Reply
Message 1 of 4
ecoalejo-62
1010 Views, 3 Replies

beam system over multicurve beam

Hi everyone

I’m working in this model, the idea is some main beams, which is a curved beam with different arcs, I tried to made it in one segment to get a continuously beam, but I couldn’t so I did it by different curve beams, but I want to create a beam system over those main curved beams, but as they were made by segment, Ican create the system beam just in the segment 2, but not in the segment 1, ( maybe because it is not possible place beam system in ‘vertical ‘ supports.

How can I do the beam system in the segment 1?

how could I make the main beam in just segment? Because maybe in one continuously curved beam the beam system works properly

thanks

pregunta-revit.jpg

3 REPLIES 3
Message 2 of 4

Beam systems are work-plane based, by sketch, so it won't work on that curve. What you need is a divided surface and a pattern-based curtain panel family that represents the beam. Then that family is assigned as a pattern to the divided surface.


Alfredo Medina _________________________________________________________________ ______
Licensed Architect (Florida) | Freelance Instructor | Profile on Linkedin
Message 3 of 4

thanks, I think I understand you, not totally sure, do you mean something like this?:

https://www.youtube.com/watch?v=WSKSYrgrqLE

 

I thought make it like that, But I hope it was possible by other way

 

thanks

Message 4 of 4
Anonymous
in reply to: ecoalejo-62

Another potential solution, either make segment one into two segments, or sketch the beam system such that one end of the curve does not go beyond vertical. The end of the arc would be perpendicular to a horizontal plane in your front view.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report