Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Auto Route

5 ANTWORTEN 5
Antworten
Nachricht 1 von 6
mphungDCHNW
266 Aufrufe, 5 Antworten

Auto Route

I have drawn a line from one duct to another and aligned that section with the line itself it has worked with the past 2 ducts that ive done however for some reason this one duct isn't working out any thoughts ?c.JPG

5 ANTWORTEN 5
Nachricht 2 von 6
barthbradley
als Antwort auf: mphungDCHNW

Probably not enough space left inbetween.  

Nachricht 3 von 6
ToanDN
als Antwort auf: mphungDCHNW

Check your fitting limitation. 

Nachricht 4 von 6
mphungDCHNW
als Antwort auf: ToanDN

how do I check that ?

Nachricht 5 von 6
barthbradley
als Antwort auf: mphungDCHNW

Are you saying Revit can't get the connection no matter how you approach?  If so, something else is going on here then if you've made this same connection elsewhere in the Project.  Post the file and let us take a look at it.  

Nachricht 6 von 6
mphungDCHNW
als Antwort auf: barthbradley

I have in the screenshot you can see that there is another spout next to it done the same way and it worked.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report