Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Aligning ends of reference lines suddenly not working anymore

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
j.jansmaG7C9C
820 Aufrufe, 4 Antworten

Aligning ends of reference lines suddenly not working anymore

Hello all,

 

I used to be able to align the ends of reference lines to reference planes. Somehow, today I noticed that I'm not able to do it anymore. 

 

I restarted Revit multiple times but I keep getting the behaviour of the following screencast. This screencast was made in a newly created generic family.

https://autode.sk/33fgmvD

 

Any clues?

Beschriftungen (2)
4 ANTWORTEN 4
Nachricht 2 von 5
barthbradley
als Antwort auf: j.jansmaG7C9C

Snaps turned OFF maybe?  "SO"'ed maybe?  Manage Tab=>Snaps.  

Nachricht 3 von 5
j.jansmaG7C9C
als Antwort auf: barthbradley

Hi Barth,

 

Unfortunetaly, that's not it :enttäuschtes_Gesicht: Snaps do work.

 

https://screencast.autodesk.com/Embed/Timeline/6bdfefb8-ed6f-464c-9842-3dd4edfd3489

Nachricht 4 von 5
ennujozlagam
als Antwort auf: j.jansmaG7C9C

try to repair the program or reinstall and see if helps. thanks





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 5 von 5
j.jansmaG7C9C
als Antwort auf: j.jansmaG7C9C

Got it! Call me an amateur, but turns out that pressing TAB a few times eventually gets me the end point.

 

Still have no clue why this happened.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report