Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Aligne profile in sweep to reference plane

2 ANTWORTEN 2
GELÖST
Antworten
Nachricht 1 von 3
mueller.shariX24DE
231 Aufrufe, 2 Antworten

Aligne profile in sweep to reference plane

Hello,

I am modeling a new door and want to reference the profile of a sweep element to a reference plan in the height. Everytime I change the parameter that controlls the height of the reference plan, I get an error message. "The dependencies are not respected". The profile of the sweep is a family and was not created in the sketch mode. 

Are there any ideas to solve my problem?

 

PS: It's not possible to create the profile in the sketch mode because the profile is too complex.

 

Greets

2 ANTWORTEN 2
Nachricht 2 von 3
L.Maas
als Antwort auf: mueller.shariX24DE

Upload the family and we can have a look

Louis

EESignature

Please mention Revit version, especially when uploading Revit files.

Nachricht 3 von 3
mueller.shariX24DE
als Antwort auf: L.Maas

I fixed it. The problem was the rotation of the sweep element in the door family.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report