Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Advice on components

3 ANTWORTEN 3
Antworten
Nachricht 1 von 4
Anonymous
231 Aufrufe, 3 Antworten

Advice on components

I work for a furniture manufacturer and we want our product to be available for architects to use in revit. We have been quote by BIMstore and the national bim library to upload certain products, is this the best way to make our products available to architects? When architects wat to add furniture such as workbenches, tool cupboards etc where would they normally go to get the files to add to the drawing? Thanks

3 ANTWORTEN 3
Nachricht 2 von 4
ennujozlagam
als Antwort auf: Anonymous

@Anonymous there are webiste like....

 

BimObject 

 

Revitcity

 

Arcat





Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 3 von 4
L.Maas
als Antwort auf: Anonymous

Beside what @ennujozlagam mentioned. If I want a particular brand/model I also will check out the website of the manufacturer/supplier.

Louis

EESignature

Please mention Revit version, especially when uploading Revit files.

Nachricht 4 von 4
chrisplyler
als Antwort auf: Anonymous

As an aside... Please don't put a bunch of masking regions and symbolic lines into your families. A lot of furniture families are very messy like that, and it's annoying.

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report