Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Adjusting roof profile in section

1 ANTWORT 1
Antworten
Nachricht 1 von 2
benfranklin0800
446 Aufrufe, 1 Antwort

Adjusting roof profile in section

Hi all,

I'm trying to model SIP Roof panels for a saw tooth roof. The trouble I'm having with drawing it as a roof and specifying the correct angles is that the end of the panel remains vertical.

Is there any way to create roof panels that are adjustable in section - ie they do not just go straight down at the end of the roof? 

I've attached a screenshot (left) and a basic diagram of what I'm trying to do instead.

 

Any input whatsoever would be appreciated.

Thanks a lot autodesk question.jpg

1 ANTWORT 1
Nachricht 2 von 2

play with Rafter Cut option.

in my example the Roof has a thickness of 400 mm..

Image 1.png

Constantin Stroescu

EESignature

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report