Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Addding DRAFT OR Copywright text to drawings

4 ANTWORTEN 4
GELÖST
Antworten
Nachricht 1 von 5
woodstim
345 Aufrufe, 4 Antworten

Addding DRAFT OR Copywright text to drawings

Hi,

I wondered if anyone in here adds DRAFT text or copywright text to drawings, before they are issued. And if so, how they do it in Revit. I used to do it in autocad by putting the draft text on a separate layer, then when I issued the drawings I cld just turn it off and re publish.

Can something similar be done in Revit?
Any help much appreciated.
4 ANTWORTEN 4
Nachricht 2 von 5
barthbradley
als Antwort auf: woodstim

...pretty much the same way, except in Revit we use visibility and graphic controls by view, by element and by category. 

Nachricht 3 von 5
ennujozlagam
als Antwort auf: woodstim

Either you can create text parameter with yes or no in your title block family or inside your revit file. Thanks




Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything...
Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
Nachricht 4 von 5
woodstim
als Antwort auf: barthbradley

Great thanks. Would you be able to give me a simple work flow to do it or afew pointers?

Thanks.
Nachricht 5 von 5
barthbradley
als Antwort auf: woodstim

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report