Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

A wall has gone transparent

9 ANTWORTEN 9
Antworten
Nachricht 1 von 10
gtdraftdesign
640 Aufrufe, 9 Antworten

A wall has gone transparent

Hi,

 

Somehow a wall has gone transparent, and I don't know how to get it to show. I'm not using view templates. I've attached a shot of the wall and a shot of the view graphics for this particular wall

ViewGraphics.JPG

TransparentWall.JPG

.

 

Thank you for any info on the matter.

9 ANTWORTEN 9
Nachricht 2 von 10
barthbradley
als Antwort auf: gtdraftdesign

I've seen that phenom before. It's go to be related to a bad void cut.  Post the file.  

Nachricht 3 von 10
gtdraftdesign
als Antwort auf: barthbradley

Attach the revit file?

Nachricht 4 von 10
gtdraftdesign
als Antwort auf: gtdraftdesign

Could I send you the file in another way? I'm not sure I want this for the world to download.

Nachricht 5 von 10
barthbradley
als Antwort auf: gtdraftdesign


@gtdraftdesign wrote:

Could I send you the file in another way? I'm not sure I want this for the world to download.


 

get over it.   

 

...or don't.  

 

Whatever.  

 

 

 

 

Nachricht 6 von 10
ToanDN
als Antwort auf: gtdraftdesign

Cut and paste it in place.
Nachricht 7 von 10
barthbradley
als Antwort auf: ToanDN

@ToanDN!  Hey! You remember that thread about the same phenom?  About six months ago I think. You were there too I think.  The culprit turned out to be a unattached void in a "Cuts With Void When Loaded" sill family -- that was attached to Wall in Project via Cut Geometry.  Remember? That's what I am thinking here.   

Nachricht 8 von 10
barthbradley
als Antwort auf: gtdraftdesign

@gtdraftdesign: try changing the Wall Justification (e.g. Wall's "Location Line").  

Nachricht 9 von 10
gtdraftdesign
als Antwort auf: barthbradley

cool. over it.

Nachricht 10 von 10
barthbradley
als Antwort auf: gtdraftdesign

Cool. So, did you get a chance to try @ToanDN's suggestion and my suggestion?  

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report