Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

3DMODELLING

4 ANTWORTEN 4
Antworten
Nachricht 1 von 5
Anonymous
393 Aufrufe, 4 Antworten

3DMODELLING

I have a deconstructed wall and I want to punch various holes in the wall like the image below. Unfortunately I can NOT repeat the void form as like the array command so I have to copy it many times which is extremely time consuming. Is there an easier and quikcer way to this? I know I can make it sketchup and import but am curious to figure it out in revit since revit is more parrametric and flexible.

REPEAT VOID.JPG

many Thanks in advance. Fachada-Chapa-Perforada-Nomen.jpg 

4 ANTWORTEN 4
Nachricht 2 von 5
ToanDN
als Antwort auf: Anonymous

You can use material with Cutouts for that.

 

Capture.PNG

Nachricht 3 von 5
Anonymous
als Antwort auf: ToanDN

GOOD TINKING OUT OF THEBOX :). I CAN NOT ASSIGN MATERIAL AS IT IS AN IN PLACE MASS

Nachricht 4 von 5
Anonymous
als Antwort auf: Anonymous

what if I do NOT want the circles to all be the same size and have various sizes?

Nachricht 5 von 5
ToanDN
als Antwort auf: Anonymous

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report