Revit API Forum
Welcome to Autodesk’s Revit API Forums. Share your knowledge, ask questions, and explore popular Revit API topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Revit 2019 Fails to Launch on stations

1 REPLY 1
SOLVED
Reply
Message 1 of 2
Anonymous
537 Views, 1 Reply

Revit 2019 Fails to Launch on stations

Anonymous
Not applicable

We are unable to start Revit 2019 on any of 21 stations as of yesterday.

I found the this online 

Error: "RevitWorker.exe was not found." at launching Revit program crash

However installing pending Windows updates has not resolved the issue on the stations 

 

Extract from the log is below, I see a lot of posts on the issue without a resolution has anyone found a fix?

 

' 1:< DBG_WARN: Could not establish Worker Services!: line 140 of NOBLE\ManageWorkerServices.cpp.

'C 15-Aug-2019 12:04:00.617;   1:< logging finished virtualization services 

'C 15-Aug-2019 12:04:00.617;   1:< logging finished worker services 

'C 15-Aug-2019 12:04:00.618;   1:< logging erased queues 

'  0.182131-- 1:<<

' 0:< TaskDialog "RevitWorker.exe was not found."

'Id : TaskDialog_NoBLE_Worker_Initialize_Error

'CommonButtons : Close

'DefaultButton : Close

' 0:< Exception occurred

 

0 Likes

Revit 2019 Fails to Launch on stations

We are unable to start Revit 2019 on any of 21 stations as of yesterday.

I found the this online 

Error: "RevitWorker.exe was not found." at launching Revit program crash

However installing pending Windows updates has not resolved the issue on the stations 

 

Extract from the log is below, I see a lot of posts on the issue without a resolution has anyone found a fix?

 

' 1:< DBG_WARN: Could not establish Worker Services!: line 140 of NOBLE\ManageWorkerServices.cpp.

'C 15-Aug-2019 12:04:00.617;   1:< logging finished virtualization services 

'C 15-Aug-2019 12:04:00.617;   1:< logging finished worker services 

'C 15-Aug-2019 12:04:00.618;   1:< logging erased queues 

'  0.182131-- 1:<<

' 0:< TaskDialog "RevitWorker.exe was not found."

'Id : TaskDialog_NoBLE_Worker_Initialize_Error

'CommonButtons : Close

'DefaultButton : Close

' 0:< Exception occurred

 

Tags (1)
1 REPLY 1
Message 2 of 2
jeremytammik
in reply to: Anonymous

jeremytammik
Autodesk
Autodesk
Accepted solution

Unfortunately, this is not the best place to ask such a question.

 

Please note that this discussion forum is dedicated to programming Revit using the Revit API.

 

Therefore, you cannot expect an answer to a question such as yours relating to installation, product usage or end user support issues here.

 

You should try one of the non-API Revit product support discussion forums instead for that:

 

https://forums.autodesk.com/t5/revit-api-forum/this-forum-is-for-revit-api-programming-questions-not...

 

The people there are much better equipped to answer your question than us programming nerds.

 

I hope this clarifies.

 

Thank you for your cooperation and understanding.

 

Best regards,

 

Jeremy

 



Jeremy Tammik
Developer Technical Services
Autodesk Developer Network, ADN Open
The Building Coder

Unfortunately, this is not the best place to ask such a question.

 

Please note that this discussion forum is dedicated to programming Revit using the Revit API.

 

Therefore, you cannot expect an answer to a question such as yours relating to installation, product usage or end user support issues here.

 

You should try one of the non-API Revit product support discussion forums instead for that:

 

https://forums.autodesk.com/t5/revit-api-forum/this-forum-is-for-revit-api-programming-questions-not...

 

The people there are much better equipped to answer your question than us programming nerds.

 

I hope this clarifies.

 

Thank you for your cooperation and understanding.

 

Best regards,

 

Jeremy

 



Jeremy Tammik
Developer Technical Services
Autodesk Developer Network, ADN Open
The Building Coder

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report