Recap Ideas
Share ideas for future product features directly with the Recap team and collaborate on existing suggestions with your peers.
New Idea

Import annotations and details from file

Status: Implemented
by Employee on ‎04-06-2015 12:07 PM

You can manually create annotations inside of ReCap but it would be nice to be able to import/bulk load many annotations and their details at once from an external file (.txt, .xls, etc.). The external file would need to include the XYZ and annotation title at a minimum, but it would be nice to be able to include the details/pictures/links that are associated with the annotation asl well.

 

These files could come from surveyors, 3D CAD models, etc.

Status: Implemented

Added in 2.1.

Inserting ReCap cloud into Civil 3d 2016, Still doesn't scale properly. We have to scale the point cloud 0.99999803.

Status: Under Review

permanent deletion of of point clouds

Status: Implemented
by Enthusiast bashar_dawood on ‎08-24-2016 07:27 AM

is it possible to permanently delete points in recap. when i delete points and save and optimize, everything looks good until i open the file in navisworks and everything shows up again, can someone help me with that please 

Status: Implemented

This has been implemented in the ReCap engine and will be available in each product based in its individual schedule.  Should be no later than the next major release (2018) for each, possibly earlier.

 

For workarounds, see the comment thread or the ReCap community forum.

Export photo from Recap 360

Status: Accepted
by Explorer jwildt on ‎10-31-2016 01:50 PM

just downloaded the latest revision.  thought the new export image would be exporting each image from the scanner.  it is only a screen shot of what is currently being viewed.  Please look to incorporate exporting all scan images. so we do not have to use the manufacturer's software.

Status: Accepted

Limitations on Meshing

Status: Future Consideration
by Explorer cespinosa on ‎08-18-2016 02:09 PM

Just found out the newest version of ReCap has a 30 square meter limitation on meshing!

Please tell me this is not true!

We just purchased 6 subscriptions of ReCap for scanning intersections of highways...

 

How long is this limitation going to be in effect?

 

 

When uploading a Recap Pro project to the cloud - only real views are uploaded.

If you want to exchange a full project with scan data you need to put the project data on a cloud drive or on USB stick.
It would be nice to have the option to upload scan data as well, so that the full project can be exchanged / copied / moved to another computer via the cloud.

Status: Accepted

I always find that reflections and general unwanted noise can force the alignment to be in incorect positions, especially when somebody has scanned right next to a mirror.

 

Being able to remove the unwanted noise/reflections before Registration would surely result in more accurate data sets.

Status: Under Review

I've just finished the registration of 2 buildings that are quite close to each other, but my surveyors didn't collect enough intermittent scans in between the buildings to accurately combine the 2 groups. It would be useful to just select a group and create a new project from that data to take straight through to indexing. Unfortunately I had to duplicate the project, disband a group in each project, then delete the scans 1 at a time in the import screens before I could index. I beleive this would provide a very fast workflow; if one person is registering they could easily keep feeding info to the Revit (or other) guys as various groups are registered.

 

Obviously the group would need removing from the previous project - or at least an option to do so.

3D Photographs to Model Ability to Embed PDF's

Status: Accepted
by Advocate bd5cents on ‎12-30-2015 09:29 AM

It would be immensely beneficial for us to be able to tag the model, attach specification data, submittal data, warranty information, and hyperlinks to the 3D model that is generated, and then to be able to send that data to an interface that allows our customers, service department, and others to view the attached information. Without the need for ReCap. I'm thinking through A360 Team!

 

Attached is our current workflow, and from there you can see why it would be beneficial. We currently use A360 Collaboration for Revit to push this information out to our contractors. It would help a lot to get the software to allow for this capability. It would streamline our deliverable process and make us more efficient as well.

 

http://therevitsaver.blogspot.com/2015/12/autodesk-memento-cellphone.html

 

The ability to host this data in the cloud through A360 would allow us to provide a customer deliverable that is easy and functional!

Status: Accepted

Improve Elevation Color Manipulation

Status: Under Review
by Advocate jared.white on ‎06-24-2016 06:23 AM

I have a very difficult time adjusting color scales for elevation color mapping.  It seems that ReCap is very clunky in this area, and should make this more user friendly.  

Status: Under Review

I have some projects which are georeferenced and I'd like to see which coordinate I use.

After set the coordinate system in the settings I cannot see it anymore. And it would be grat if the coordinate assign window is the same like in Civil or map and if you can filter the coordinate systems with EPSG codes, countries etc.

Furthermore it would be great if the coordinate system of the point cloud is set automatically and is shown for checking to the user.

 

Regards,

Eric

Scan Groups During Registration

Status: Implemented
by Participant Stephen.Brechin.01 on ‎11-29-2016 01:16 AM

I would like to see an additional level of hierarchy during registration.  Would it be possible to retain (or create) scan groups as we go through the registration process?  In its simplest form I envisage that, if I had 3 registration groups and I merge two of those, the left side of the registration window would now show two groups.  Doing this would make it much easier to match the outstanding scans to those already registered.

Status: Implemented

Base sketch

Status: Gathering Support
by Explorer risc2010 on ‎11-29-2016 06:54 AM

Would be very nice if a base sketch capability is incorporate it into Recap like line circle, square etc  with the option of snapping to the points of the cloud

and later export those trace to AutoCAD or any other app to use it for developing a 3d model from it.

Thank you

Measuring tool

Status: Gathering Support
by Explorer risc2010 on ‎12-20-2016 01:05 PM

I think the tool is nice but it need some more work for a little more precise snapping specially on perspective views. see it don't lock correct to edge sometime too. if any one have a suggestion about the correct way to snap please advice here where to go.

Registration Tightening

Status: Gathering Support
by Advocate jared.white on ‎04-03-2017 09:29 AM

Hello, 

 

I am working through a registration issue now, that is very large (over 2000 scans).  It appears that recap will only allow you to merge / constrain a single scan to one other single scan.  What we notice is that there is a lot of stack up error from one side of the project to the other.  Cyclone has a feature that is ran once scans are linked one by one that is called 'auto add cloud constraints'.  What this does is look at all overlap between the registered scans, and creates a constraint between anything that overlaps.  This tightens up the error dramatically with large projects.  It would be great if Recap would do the same thing.  

 

JW

It would be great to have a way to align the scan data during registration to a NWD model. This way the 0,0,0 of the scan data can match the NWD without the need to transform it in Navisworks.

 

 

Export to LAS

Status: Gathering Support
by Advocate baumbach on ‎04-13-2017 05:08 PM

Include the option to export to LAS files, retaining lat/lon/elev data.

 

Currently trying to find a low-effort workflow for generating a Revit toposurface from ReCap Photo-to-3D data. I have a license for Globalmapper which has some very slick tools for filtering out points that don't represent ground, and then generating 3D contours from the resulting subset, but Globalmapper is happiest with georeferenced LAS files.

 

If ReCap could export LAS this workflow would be complete.

Zoom while Selecting

Status: Under Review
by Advocate jrfrost on ‎01-15-2016 01:24 PM

You should be able to zoom in and out while selecting points.

Status: Under Review

Mirrorball Visualization

Status: Under Review
by Employee on ‎06-02-2016 01:06 PM

I would like to see all Mirrorballs in the RealView, even if they are obstructed/behind something.

 

I would also like to be able to change the color of the mirrorballs. They are difficult to see in black & white/intensity RealViews.

Status: Under Review

Enhance the regions functions!
Multi select point clouds and add to regions.
Add a regions management similar to the AutoCAD layer management:

2017-02-20_1305.png

 

Thanks!

Submit Your Ideas

Share and shape product ideas.

Submit an idea
Idea Guidelines

Please review our Idea guidelines and best practices before posting a new idea, or voting on an existing one!


For more info about ReCap visit the ReCap product page