ReCap Forum
Welcome to Autodesk’s ReCap Forums. Share your knowledge, ask questions, and explore popular ReCap topics.
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. To translate this discussion, select the language.

ReCap Forum

Reply
Post 1 of 3

Saving with a point cloud clipped.

28 Views, 2 Replies
04-11-2017 09:49 AM

We have ran into several problems with saving an RCP, and losing the majority of the point cloud.  I believe I've found the problem.  When we are cleaning an RCP, we use the 'clip outside' tool.  If you happen to save while the point cloud is clipped, the rest of the RCP is unrecoverable when you open it back up.  

Post 2 of 3

Re: Saving with a point cloud clipped.

04-11-2017 09:56 AM in reply to: jared.white

Hi @jared.white,

 

When you open the project back, does the "Unclip All" tool appear? Can "Unclip All" tool bring back the clipped area?

 

 

Thanks,

Yan

Highlighted
Post 3 of 3

Re: Saving with a point cloud clipped.

04-11-2017 12:41 PM in reply to: yan.fu

no, it does not appear

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post